CUPLOCK SCAFFOLDING
TSINGSHAN FACTRORY CUPLOCK SCAFFOLDING SYSTEM IN CONSTRUCTION BUILDING CUP LOCK SCAFFOLDING SHEET METAL BOTTOM CUP INDUSTRIAL 48.3MM OD
MATERIAL
Q235 Q345
SURFACE TREATMENT
Painted、Galvanized
PRODUCT DESCRIPTION
Cuplock scaffolding is a kind of multi-purpose steel tube scaffold system that can be used as load-bearing scaffold and working scaffold.
Cuplock scaffolding standard is made from OD48.3x3.2mm scaffolding pipe and scaffold steel tube. While ledgers are made from 3.2mm or 3.0mm scaffold tubes.
DIAMETER
48.3*3.2mm
Ledger
It refers to the horizontal members of the cuplock scaffolding that are used to provide horizontal support for the load and steel planks. It is welded with two forged blades at both ends of the steel pipe with a diameter of 38.3 mm.
Steel Toe Plate
It is a long steel plate set on the standards on both sides of the scaffold plank access. It is almost as high as the instep, therefore, it is called steel toe board. It is mainly used to prevent objects from falling off when they roll to the steel toe board and prevent workers from falling.
Intermediate Transom
It is designed to provide a safe mid-bay support for scaffold boards. One end is provided with an integral locking device to prevent movement along the ledger direction during use.
Standard
It refers to the vertical members of the cuplock scaffolding system that are used to provide vertical support for the cuplock scaffolding system.
Steel Plate
It is a very important part of the cuplock scaffolding system. It is fixed on the cuplock scaffolding ledger for workers to walk on. Every corner is provided with a welded hook. Two or three beams are welded under the scaffold plank. Perforated plates are used to improve its anti-slip performance.
Stair Stringer
It is fixed on the cuplock scaffolding ledger to provide a ramp for workers to climb up to the upper access. It consists of rectangular steel pipes with hooks and anti-slip stair treads. Diamond-strut anti-slip stair treads are employed to provide superior anti-slip performance.
U-head Jack
U head is welded on the screw rod with nut, you may screw the nut to adjust the height of the screw rod.It is mainly used to connect cuplock scaffolding standards to provide strong support for applications where beams require support.
Diagonal Brace with Blades
It is provided with a blade bolted on both ends. Generally, it is connected to the cuplock scaffolding standards by locking blades into the cup lock.
Jack Base
It serves as the base of the cuplock system. It helps keeping the cuplock scaffolding system stable by adjusting the height of the screw rod.
Side Bracket
It is an extension of the cuplock system that is designed to extend or widen the reach with steel planks Together with steel planks, it forms a platform that use for storing building accessories.
Truss Ledger
It is a horizontal member of ringlock that allow for scaffolding over large spans or gaps to provide horizontal support for the load and steel planks.
Diagonal Brace with Couplers
Coupler is provided at both ends of the diagonal brace and is connected to the standards firmly.
ADVANTAGES OF CUPLOCK SCAFFOLDING
Cuplock is a flexible and adaptable scaffolding system that can be used to make a wide variety of structures which serve useful for construction, refurbishment or maintenance. These structures include facade scaffolds, birdcage structures, loading bays, curved structures, staircases, shoring structures, and mobile towers. Hop-up brackets let workers easily install work platforms at a half meter increment below or above the main deck that gives finishing trades – such as painting, flooring, plastering – flexible and easy access without disrupting the main scaffold.
EASY TO STAND
No nut and bolt or wedge, just lock the blade into cup at each node on the standard.
SIMPLE
Fast and simple to erect with only four component fastenings.
LIGHT WEIGHT
Manufactured using 3.2mm thickness high grade steel, Cuplock Scaffolding System is 20% lighter than standard 4mm thickness scaffolding tube.
ECONOMICAL
Cuplock Scaffolding System with only three maincomponents.
FAST
30%-50% faster than traditional scaffolding.
DURABLE
Hot-Dip-Galvanized provides a low maintenance, long life.
VERSATILE
With 500mm cup intervals on the verticals, Cuplock Scaffolding System is extremely versatile Facade, Shoring Structures, Circular, Birdcages,Staircases, Mobile Towers and etc.
FLEXIBLE
0.6m to 3.0m bays using boards or battens.
SLIDE THE UPPER CUP UPWARD AND LOCATE THE LEDGER FORGED BLADES INTO THE LOWER CUP
SLIDE THE UPPER CUP DOWN TO COVER THE LEDGER FORGED BLADES
HAMMER THE UPPER CUP TO ENSURE THE RIGID CONNECTION BETWEEN THE LEDGER AND THE STANDARD
PROCEDURE OF CUPLOCK SCAFFOLDING
FREQUENTLY ASKED QUESTIONS
What is your Tsingshan scaffolding prices?
Our prices vary from period to period due to cyclical changes in the price of raw materials.
Can you send samples?
Of course, we can send samples to all parts of the world, our samples are free, but customers need to bear the courier costs.
Can I visit your factory?
Of course, we welcome customers from all over the world to visit our factory.
Does your scaffolding have quality inspection before loading?
Of course, all our products are strictly tested for quality before packaging.
What are the certifications for your scaffolding?
We have ISO 9001,EWC and other certifications.
How to pack your scaffolding?
The inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion during ocean transportation..
QUALITY
Leading exporter of scaffolding solutions worldwide.
CONTACT
WhatsApp:+86-17695531343
TEL:+86-022-26819651/26819652
© 2024 tsingshan-scaffold.com All Rights Reserved.
E-mail:snow@tsjgsteel.com